Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Co2 Gas ? (https://airsoftcanada.com/showthread.php?t=179117)

jimwu July 20th, 2016 03:04

Co2 Gas ?
 
Hi ! I just got my kjw m700 , so can I use co2 gas on it ?
The original is using green gas so I wonder can use co2 gas or not ?
And if use co2 gas what do I need to pay attention for it ?
Tks


cheers
jim

cetane July 20th, 2016 17:32

You can not charge a green gas mag with straight co2. It'll go boom in your hand. I don't know if they have co2 mags for it. If you do want to use co2 on the g&g mags, it will need to be regulated down off a tank & remote line tapped to the mag.

jimwu July 21st, 2016 01:19

Quote:

Originally Posted by cetane (Post 1985276)
You can not charge a green gas mag with straight co2. It'll go boom in your hand. I don't know if they have co2 mags for it. If you do want to use co2 on the g&g mags, it will need to be regulated down off a tank & remote line tapped to the mag.

Hi ! Thanks for your reply and info , thank you very much , I did see the youtube mod it on the original mag , but not understand it so I look for help here , thank you mate .

RainyEyes July 21st, 2016 01:58

Those mods all run HPA and if you want to modify your mags for CO2 you might as well get an AEG

jimwu July 21st, 2016 07:29

Quote:

Originally Posted by RainyEyes (Post 1985314)
Those mods all run HPA and if you want to modify your mags for CO2 you might as well get an AEG

Hi ! Thanks for reply but I own the kjw m700 sniper , that's why I ask this noob question ;)
I did own an aeg which is custom build my own one , I didn't own any GBB rifle so its no point to mod it , I just want to know if the original mag can stand for the co2 or not that's all :)
But still thank you for your reply and info :)

cheers

Zeroroaster July 21st, 2016 11:38

Excellent rifle by the way...if I was going to go with a gas sniper, the M700 is certainly on my list. That said, if green gas is delivering the FPS and is readily available, why not stick with it? There's lubricants in green gas that will keep your gun working properly and require very little maintenance, whereas CO2 will dry out seals and such requiring a little more work.

There's no denying the punch of CO2, but if you don't really need it, why do it? For the same reason I love my 1911, I guess...it kicks like a mule! :)

cetane July 21st, 2016 12:02

Shot to shot consistency with hpa tapped mag much better than propane & easy to fine tune fps. Who still uses green gas?

Quote:

Originally Posted by Zeroroaster (Post 1985339)
Excellent rifle by the way...if I was going to go with a gas sniper, the M700 is certainly on my list. That said, if green gas is delivering the FPS and is readily available, why not stick with it? There's lubricants in green gas that will keep your gun working properly and require very little maintenance, whereas CO2 will dry out seals and such requiring a little more work.

There's no denying the punch of CO2, but if you don't really need it, why do it? For the same reason I love my 1911, I guess...it kicks like a mule! :)


Zeroroaster July 21st, 2016 16:21

True on the consistency, but I prefer not to pack a tank. I still see lots of green gas rifles in this part of the world....also for the reason of not wanting to pack a tank. Personal preference I guess. In my case, my sniper is a spring gun. Simple, reliable, gets it done.

jimwu July 28th, 2016 04:33

Hi All Thanks for all kind of suggestion , so I think I am going to stick on the original state , mean not going to mod it , thanks again

cheers

jimwu August 2nd, 2016 06:54

Hi All ! I got new question here need your help , I don want to keep on open new post , so I decided to continue here , hope is ok for you all :)
Now I got a problem with the m700 magazine , the problem is when I leave the remain gas inside the mag after I play , leave it till next day and I cant shoot anything from the mag , no BB come out or no gas sound at all , and I use hand to push it found that very hard to push , its just like stuck or something , and I did open it out and check found nothing at all ... ? do you or anyone have this kind of problem ?
And how to solve it ? thanks

cheers

Zeroroaster August 3rd, 2016 17:35

If I'm reading that right, it sounds like the gas valve is sticking. Are you using green gas or propane?

Hectic August 3rd, 2016 17:46

Seems like as said above the valve is stuck. You can move it with effort? Then you may be able to take it out and soak it in silicone oil that may repair it. Or just buy new valves.

jimwu August 19th, 2016 03:58

Quote:

Originally Posted by Zeroroaster (Post 1986214)
If I'm reading that right, it sounds like the gas valve is sticking. Are you using green gas or propane?

Yes sir I am using green gas :)

jimwu August 19th, 2016 04:00

Quote:

Originally Posted by Hectic (Post 1986216)
Seems like as said above the valve is stuck. You can move it with effort? Then you may be able to take it out and soak it in silicone oil that may repair it. Or just buy new valves.

If there is no gas inside then all are ok , if I leave gas inside it then it will stuck :)


All times are GMT -4. The time now is 17:29.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.