Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   PDI Cylinder (https://airsoftcanada.com/showthread.php?t=171581)

Smoles April 12th, 2015 21:10
PDI Cylinder
 
i bought this cylinder years ago and have been it for a while and originally i super glued the inner o-rings in place but when i cracked it open recently the o-rings were a little smashed up and falling out wondering what can be used or have ppl done to hold these o rings in place i have replaced and re-glued them recently but it seems like its a band aid. got any ideas???

http://www.x-fire.org/tm_l96/e.precision_hd.html

Kos-Mos April 12th, 2015 22:11
I stopped using PDI pistons and cylinder because of that.

Anyways a 3-piece APS-style piston is a LOT better in consistency.
PolarStar used to make one.

Even the LayLax piston for L96 is a LOT better.

shootersaber April 15th, 2015 03:47
Quote:
Originally Posted by Smoles (Post 1942575)
i bought this cylinder years ago and have been it for a while and originally i super glued the inner o-rings in place but when i cracked it open recently the o-rings were a little smashed up and falling out wondering what can be used or have ppl done to hold these o rings in place i have replaced and re-glued them recently but it seems like its a band aid. got any ideas???

http://www.x-fire.org/tm_l96/e.precision_hd.html
Do you put any oil for O-ring???

SuperHog April 15th, 2015 08:41
Silicone oil


All times are GMT -4. The time now is 03:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.