Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Accessories Discussion (https://airsoftcanada.com/forumdisplay.php?f=25)
-   -   Lipo bag alternatives (https://airsoftcanada.com/showthread.php?t=167496)

TopGunnerz September 17th, 2014 19:37

Lipo bag alternatives
 
Hi, I've recently switched over to 11.1v Lipo batteries, and was wondering if there is a cheap alternative to buying a Lipo bag or getting an ammo can. Any ideas would be appreciated, thanks!

Kingsix September 17th, 2014 19:51

ceramic floor tile

lurkingknight September 17th, 2014 20:13

concrete floor...

make sure there's nothing in the area of where you're charging... around or above.

a metal toolbox on ceramic tile will also work.

A lipo bag will not stop a lipo fire, nor will the concrete or ceramic...

it will hopefully contain it long enough for you to do something about it or further prevent the spread of the fire.

ccyg8774 September 17th, 2014 20:17

Metal ammo can (from army surplus store)

TopGunnerz September 17th, 2014 22:30

I'm looking for something I can transport, and an ammo can is too bulky, and I'm wondering if there is a way to construct my own bag so I can transport them without one bursting into flames and the rest of my gear catching fire, if one were to get punctured during transport

DrDoUm September 17th, 2014 23:13

Is it because you are afraid of accidentally striking hit several times with an hammer while transporting it?

Lipo Battery fire. - YouTube



Now, on a more serious note, I guess you could find a small metal can in a camping/hunting store that would protect your battery. Or maybe an empty coffee can would do.

Personally I've been carrying my Lipos in a regular bag for years without issue.

EDIT: Actualy, the only issue I had was the small charging wire ripping at its base making it impossible to charge my battery, so I had to buy a new one.

EagleDriver September 17th, 2014 23:28

Lipo bags are really inexpensive - less than $3. I cannot think of anything else (off of the top of my head) that would be cheaper than that.

http://www.hobbyking.com/hobbyking/s...UMBO_Sack.html

Sequential September 18th, 2014 00:12

I think a small pelican case for transporting lipo's would be good.

lurkingknight September 18th, 2014 00:19

a bag is not meant to transport them... they're for charging discharging the batteries.


I use something like this:

http://www.tacklewarehouse.com/Plano...age-P3600.html

go to walmart. they're 5 bucks. leave the whole box in the car, don't carry batteries with you on your kit.

A guy here in ottawa tripped and fell on a branch, it punctured the spare lipo that he was carrying in a pouch... it went up in flames while strapped to him.

No injury, but good enough reason not to carry a battery with you on your kit... at least without a hard case/box.

If you must carry one on your kit in a utility pouch, find an appropriate hard case to put it in that will at least offer some protection.

ThunderCactus September 18th, 2014 00:31

I haven't actually used a lipo bag since the 2nd time I charged a lipo.
They charge right next to me, so I know right away if somethings going wrong.

They also only fail during charging if something bad happened to them prior to charging, so you've got really good safety windows on them.

targetGspot September 18th, 2014 09:38

I've never used a bag for charging. Mine barely warm up during charging, less than any other battery I've used in the past actually. I charge ANY battery away from anything that could catch fire and always monitor them throughout charging. I use a Pelican case, (I already had a few) for transport. Not because I'm worried about a fire but it just keeps everything together. A bag won't help against them getting banged around, crushed or punctured, any hard case should suffice. I recommend plastic just in case an end manages to come off, (shouldn't) but that way less chance of it shorting out.

BogardusFoul September 18th, 2014 09:57

Make sure you have the proper lipo handling equipment.
http://images.g4tv.com/rimg_606x0/Im...cret-world.jpg

Deadpool September 18th, 2014 10:02

Ceramic flower pots are a good alternative.

TopGunnerz September 18th, 2014 10:16

Alright thanks, I guess a small hard case would work, yes that whole story with a Lipo going up in flames is what I was trying to avoid, thanks lurkingknight

waylander September 18th, 2014 10:44

Just use care and common sense. I've been using lipos for years in RC Heli's and cars, I only use a lipo bag while charging, if it's going to go it's going to go, you do NOT have time to do anything about it once the reaction starts so definitely use something or put it on non flammable ground and away from flammables while charging.

During transport is the least likely time for a lipo to spontaneously catch fire, as long as you keep them protected (i.e. don't put a screw driver in the same container) you're fine. The vast majority of fires are because of over charging (either too fast or too much) and the left over small parts are from damage and of course on purpose. I've seen a 22.2v 3000mah lipo survive a heli crash from 50' up. Punctured, torn, ripped apart but it didn't catch on fire.

For transport I use everything from a Plano tackle box (for batteries, tools and spare parts) to lunch box's to tool boxes... etc. I've even used those cheap ziploc containers meant for lunches...


All times are GMT -4. The time now is 22:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.