G&G CQB-R CAS version conversion to full metal
 

Since the AEG in question is a G&G CAS version, and the full metal upper and lower receiver are made by G&G this should be a straight forward process, shouldn't it
The upper and lower receiver are from a SR-16.
Does anyone have any tips or advice for this swap, I am willing to upgrade some components now

Armoredshell

Has nobody done this then? Am I the first

I don't exactly understand what you're asking. You have a G&G metal body, or some other brand, or what?

You weren't very clear, but it should work anyway because like most guns, G&G's are pretty much TM clones.

Are you swapping a G&G SR-16 upper for the stock G&G CQB-R upper? If so its just pulling out the pins replacing the uppers and putting the pins back.

please word your question more coherently.

My apologies if my post is being misunderstood

I shall start again then
I purchased a G&G CQB-R, the CAS version, this is the one with tinted lower receiver
I then purchased a G&G SR-16 full metal upper and lower receiver.
I now want too swap out the receivers and make the CQB a full metal Aeg

Hope this clearer now thanks

Armoredshell

remove the internals from the cqbr and put them into the sr16 and viola done

What is the question in this?

Nope not easy I have found out
1. CQB (cas version upper does not fit a SR-16) full tear down required
2. Barrel does not fully engage into a SR-16, just about 2mm off, my fix grind off 2mm from gas tube (to fit the rails)
3. Watch that wire placement on rear, need to grind a clear channel

Tools required for this change
small mallet, flat blade screw driver, small punch, needle nose pillars

Special tools, A #2 Phillips screw driver at least 8" long to remove crane stock
Snap ring pillars to remove the barrel
before
http://i135.photobucket.com/albums/q...7/6379d6a7.jpg
http://i135.photobucket.com/albums/q...7/ce5fd38b.jpg
After
http://i135.photobucket.com/albums/q...7/537d1ca5.jpg
http://i135.photobucket.com/albums/q...7/0ceb0aba.jpg

Was actually looking for advice