KWC Desert Eagle GBB PROBLEM!!
 

Just to clarify I'm not Canadian, so excuse my English.

I really need help, I bought my gbb two days and already gave me trouble.

This morning I went to take some shots, and realized that the balls were not coming out with force, were just "slipping" of the barrel.
When I took the barrel to look I saw that the balls appear to be stuck in the hopup, and pushed by the next time I shoot.

I'm very sad, because here where I live (Brazil) a gbb costs about $ 450, and only lasted two days without problems? :confused:

please, help me!!! :???:

have you tried turning the hopup adjustment down?

You have to take the barrel off, and use a small needle to adjust it....

i've tried but it did not work

mmm weird....

have you looked the the loading nozzle? is it damaged?

is not damaged.

I went to take some shots now (60 to be exact) and the last 20 left normal, but now came back to hang. I do not understand! :(:(

clean the barrel? oil the hopup bucking a bit?

What kind of BB's are you using?

I had that issue i just pushed the bbs out then worked fine but now i have 3 mags that are all leaking and i have had no problems with them before always kept good care of them one of them seems to fire 3 shots then it blows the rest of the gas out so i dont know what is wrong with that one

the barrel is clean, I had neither time it dirty.
lubricate it all with silicone oil.
use bb king 0.20

:(

oh, and i use the coleman propane.

Sounds like a lemon (defect)

Upgraded hammer spring would be my first (and cheapest) guess.

Check if you can hold the hammer back with your thumb, hold down the trigger & let go of the hammer to engage the blow back action....If this works flawlessly every time. My hammer spring idea might work ^_-

Good luck - alex

friends reading the manual hop up I read the following sentence:
"lube oil reduce the friction on the upper side of bb bullet and reduce the effect of spin. Please don't put lube oil on bb bullet and bullet packing."

Well, I put silicone in the hop up ... I thought it was necessary.
This may be the cause of my problem?

/\ say yes please! :(:(:(

nah, thats just to tell people to not overlube the hopup rubber, making the hopup effect not working....

PS: can you dry fire your gun? does the slide cycle strong?

yes it does the strong cycle, do not know what might be happening

I had one of these and it was doing close to the same thing. Pull the nozzle "block" out and check for cracks. Mine had spider cracks all over it and it was making the valve not work right.