Airsoft Canada - Vfc m4 gbbr

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)

- - Vfc m4 gbbr (https://airsoftcanada.com/showthread.php?t=114737)

thpethalK

November 29th, 2010 08:25

Vfc m4 gbbr

http://www.facebook.com/photo.php?fb...5545733&ref=nf

I was browsing through the pictures on VFC's Facebook page when I came across this. Does anyone know what damage could be caused by depressing the trigger while the upper and lower receivers are separated?

HKGhost

November 29th, 2010 13:53

in the picture it looks like the hammer is cocked and when firing it like that, it will cause unnecessary wear on the hammer and trigger assembly. Correct me if I'm could be wrong.

panzergrenadier

November 29th, 2010 13:54

You're supposed to ease it by using your thumb while pulling the trigger... same as on a real one...

Gunny_McSmith

November 29th, 2010 15:58

Quote:

Originally Posted by HKGhost (Post 1359155)

in the picture it looks like the hammer is cocked and when firing it like that, it will cause unnecessary wear on the hammer and trigger assembly. Correct me if I'm could be wrong.

actually, hammer smashed against the firing block (the aluminium block with the firing pin, and the bolt lock.... ) and it could deform it.... :S

All times are GMT -4. The time now is 01:55.