KSC M9 Nozzle
 

Hi

Today in some reason the loading pin on the nozzle decided to break :(
there are anything that I can do before buying a new nozzle for my beretta?
maybe some mod? to glue up a tiny piece of plastic or something.
because It's a headache to buy this part in where I live.

http://www.airsoftpost.com/images/la..._SemiBB_lg.jpg

Thanks.

I have a modified nozzel as my M9 came with a broken loading pin.

I took a finishing nail, trimmed it up, filed and sanded the pin end that contacts the BB smooth as glass. I tapped a small hole in the nozzel. I heated up the end of the nail and gently slid it in. Once I was sure that the heat was gone and it was set I used Crazy Glue and coated the nail and the nozzle until the nail was the same width as the original pin.

It worked great and is still together after a year... although I did end up getting a replacement nozzle directly from KWAUSA.

If this is a System 7 model you can PM me.
I actually got a BNI Package spare nozzle for MP7 but system 7 is all the same AFAIK.
Otherwise just order from KWA USA and it would cost $20 for shipping atleast.

tte404 very impressive!
how to do such a small hole?

if you can upload a picture of your nozzle it would be very halpful
and last question, how do I disassemble the nozzle from the slide?

thank you guys! :)

guys I need some guidelines to the disassembling

YouTube - KSC BERETTA M92 ELITE IA Field Strip & Reassembly
Here you go. Though if you don't know how to dis-assemble, i wouldn't embark on this. Take it to a gun doc. While fixing GBBs i quickly learned things can go real bad real fast, until you get the hang of it that is.